Product Application
The cable tray is a special type of perforated cable tray electrical which provides good performance in commercial and light industrial electrical applications. Cable tray galvanized refers perforated cable tray whose surface is fabricated by using quality raw material Pre-galvanized
The tray offers a 45 mm cable laying depth, with widths 150 mm, 300 mm, 450 mm, 600 mm and standard lengths of 3 m.
Flexible to install, its good performance combined with a visually appealing profile in the electrical industry. For general use indoor, with a clean looking finish, the tray is offered in pre-galvanized steel, however,if use outdoor that need the extra corrosion protection,hot dip galvanized after fabrication cable trays are available.
As a reconized cable tray roll forming machine manufacturer, BOSJ also can provide a full range of cable tray accessories to enable fast on site fabrication of tees, risers, bends and crosses.
Main Features
1) Simple structure in linear type ,easy in installation and maintation.
2) Adopting advanced world famous brand components in pneumatic parts ,electric parts and operation parts.
3) High pressure double crank to control the die opening and closing.
4) Running in a high automatization and intellectualization,no pollution
2. Parameters:
Decoiler Type : manual decoiler
weight capacity of decoiler : 5.0T
2) Feeding and Leveling Device
It used for making the material flat before feeding into the roll forming machine
3) Punching and cutting Device
It used for punching the suitable holes and cut to target length of products.
Punching Type: Hydraulic Punching
Cutting type: Hydraulic cutting
Cutting material: Cr12
Hydraulic power: 5.5KW
Hydraulic Pressure: 16Mpa
4) Rolling Forming System
main motor type : phase asynchronous motor(manufacturer: shanghai nanyang)
motor power: 15KW
speed of forming : 10-14.8m/min
material of roller : GCr15 24 groups rollers
material of main shaft : 40Cr(The main shaft have the high frequency grinding &heat Treatment and the surface of shaft is chroming)
diameter of main shaft: ø80mm
5) PLC Control System
Control the quantity &punching length& cutting length automatically
Voltage: 380V, 3 Phase 50Hz
Size of PLC Control Board: 700mm(L)x1000mm(H)x300mm(W)
PLC manufacturer: Japan Panasonic
Solenoid valve
Oil hydraulic cylinder
Bearing
Oil pipeline
Touch Screen
Encoder
6) Product support frame
The length of product support frame : 6m
| Raw material |
| material spec | colored steel sheet, galvanized steel sheet, aluminum sheet |
| thickness of coil sheet | 0.8-1.5 mm |
| Side rail height | 50-60mm |
| length | Max3000mm |
| Width | 50-500mm |
| Production capacity | 8-15m/min |
| Machine details |
| roller material | high grade NO. 45 forged steel with 0.05mm hard chrome plating |
| shaft material | high grade NO. 45 carbon wrought steel |
| cutting blade | Cr12 mould steel with quenched treatment |
| diameter of shaft | 80mm or as your requirement |
| main frame | 350 H steel |
| forming steps | 24rows |
| hydraulic station power | 15 KW |
| hydraulic pressure | 10-12MPa |
| controlling system | famous PLC computer control |
| material of cutting table | Cr 12 mould steel with quenched treatment |
| hydraulic oil | 40# hydraulic oil |
| After sale-services |
| Delivery time | 30 workdays after receiving the deposit |
| Payments | 30% deposit by T/T in advance and 70% balance after inspection confirmation before shipment |
4. Equipment overview:
1. Double cantilever gear drives, the producing width of machine is adjust continually, it is possible to change the width and height.
2. Rolling stations is 24 steps ,the main machine consists of AC motor,reducer,high precision liner rail, transmission box on left and right, horizontal adjustment system and rolling moulds. The machine base and transmission adopts welding structure , with hardness treatment, the material of roller is 45# steel.
3. The roll forming craft is made by the special Germany cold roll forming program COPRA; the craft is also made the FEA analysis and check. The structure of the rollers is combined, so the line speed difference and resisting force of roll forming is small. The sheet is easy to feed. All these assure the accuracy and stable of the roll forming.
5. What we have?
Our Cable Trays are manufactured Fully Automatic Punching & Cuting Machines accroding to your required specifications.We can choice high quality hot dip or electrolytic galvanazing sheet steel according to your requirements.For More Detail of Our Cable Carying Systems , Please do not hesitate to contact with us directly.simple technique process, make cable ladder with high quaulity, high speed, cable tray, cable ladder for fixing cables.Cantilever type cable tray production line,Cantilever type cable tray production line manufacturer,Cable Tray Production Line,cable tray machine line,Ladder Type Cable Tray,ladder type big span cable tray,Cantilever type cable tray production line,Ventilated Type Cable Tray Unventilated Type Cable Tray Wire Mesh Cable Tray Cable tray machine Cable tray roll forming machine groove cable tray roll forming machine Channel Type Cable Tray Production Line Cable Tray Forming Machine.
6. Photos:
